-
Sale!
PRO-PART LINE 12.5MM thick 8x2500mm brass -
PRO-MATE 3 AL.LACQUER BLANCO 10 MM B71123003 -
PRO-MATE 3 ALUM.ANODIZED SILVER 12 MM B71122004 -
PRO-MATE 3 ALUM.ANODIZED SILVER 10 MM B71122003 -
PRO-MATE 3 AL.LACQUER BLANCO 12.5MM B71123004 -
PRO-MATE3 ALUMINIM HIGH GLOSS 12.5MM B71124004 -
PRO-MATE3 ALUMINIM HIGH GLOSS 10MM B71124003 -
PRO-MATE 3 PVC BLANCO 10MM B71111009 -
PRO-MATE 3 ALUM. ANODIZE 6MM B71342616 -
PRO-MATE 3 ALUM. HIGH GLOSS 8MM B71142032 -
Sale!
Mapeguard UM is a premium-performance, lightweight, waterproofing and vapor-pressure-equalizing underlayment membrane that provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center or up to 24" (61 cm) on center with double-layer plywood subfloors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds. - Prevents transmission of in-plane substrate cracks up to 1/8" (3 mm)
- Recommended for use with polymer-modified mortars
- FastTrack Ready™: Approved for use over young (green) concrete and mortar beds
- Time-saving: Embed membrane then install tile immediately
- Engineered cavity design allows easy single-pass filling of surface core with less mortar
- Uncoupling, waterproofing and water vapor membrane up to 25 lbs. (11.3 kg) MVER and 100% relative humidity (RH)
- Compression resistance to support rolling loads
- Approved for radiant-heating applications
- Light green, translucent color shows mortar coverage under membrane
- Reduced “roll memory” and unique tri-layer construction keep membrane flat
-
Sale!
Mapeguard UM is a premium-performance, lightweight, waterproofing and vapor-pressure-equalizing underlayment membrane that provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center or up to 24" (61 cm) on center with double-layer plywood subfloors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds. - Prevents transmission of in-plane substrate cracks up to 1/8" (3 mm)
- Recommended for use with polymer-modified mortars
- FastTrack Ready™: Approved for use over young (green) concrete and mortar beds
- Time-saving: Embed membrane then install tile immediately
- Engineered cavity design allows easy single-pass filling of surface core with less mortar
- Uncoupling, waterproofing and water vapor membrane up to 25 lbs. (11.3 kg) MVER and 100% relative humidity (RH)
- Compression resistance to support rolling loads
- Approved for radiant-heating applications
- Light green, translucent color shows mortar coverage under membrane
- Reduced “roll memory” and unique tri-layer construction keep membrane flat
-
Sale!
Waterproofing Sheet Membrane for Ceramic Tile and Stone Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms. -
Out of stock
Waterproofing Sheet Membrane for Ceramic Tile and Stone Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms.
-
Sale!
Lightweight Uncoupling, Crack-Isolation and Waterproofing Membrane for Electrical Floor Heating Mapeheat Membrane is a lightweight uncoupling, crack-isolation and waterproofing membrane that also provides vapor management and load support. This patented membrane is designed to speed the installation of tile and stone in interior rooms such as bathrooms, kitchens and three-season rooms where the luxury of radiant floor heating is desired. Mapeheat Membrane’s thin profile works well with remodeling projects where the new floor will be installed directly over a preexisting one. Once the heating cable is set within Mapeheat Membrane’s rounded square reliefs, a tile mortar can be applied immediately. - Recommended for use with polymer-modified mortars
- Membrane thickness is less than 1/4" (6 mm)
- Replaces plywood or cement board as tile underlayment
- Works with all these floor types: ceramic tile, porcelain tile, granite, marble, natural stone, laminate/engineered wood floors, luxury vinyl tile (LVT) and luxury vinyl plank (LVP)
- Heating cable lays flat and secure
- UL-certified for wet environments, such as shower floors
- Suitable for areas with up to 25 lbs. (11.3 kg) MVER and 100% relative humidity
- Does not support mold growth
-
Sale!
Radiant-Heating Cable for Use with Mapeheat Membrane Mapeheat Cable is a free-form, twisted-pair, floor-heating cable for use in any residential interior room where the comfort of radiant floor heating is desired. The cable can be spaced on site to provide 10, 12 or 15 W per sq. ft. based on the desired wattage output requirements of the installation. Mapeheat Cable is available in 33 lengths to accommodate areas as small as 6 sq. ft. (0.56 m²) and up to 293 sq. ft. (27.2 m²). - Heats many types of flooring, such as tile, stone, luxury vinyl tile (LVT) and engineered wood
- Available in 120 V and 240 V
- Zero EMF (electromagnetic field) cable design
- Visible mid-point marker on heating cable
- Ultra-thin cold-lead splice fits easily into Mapeheat Membrane
- Suitable for use in wet environments, such as showers and steam rooms
