- + Spacers
- Size: 1/16" spacers
- Bags: 81-P116B
- Quantity: 300
-
Sale!CB SPACERS 1/16" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/16" - 300 per Bag.
-
Sale!CB SPACERS 1/2" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/2" - 35 per Bag.
- + Spacers
- Size: 1/2" spacers
- Bags: 81-P12B
- Quantity: 35
-
Sale!CB SPACERS 1/4" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/4" - 100 per Bag.
- + Spacers
- Size: 1/4" spacers
- Bags: 81-P14B
- Quantity: 100
-
Sale!CB SPACERS 1/8" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/8" - 200 per Bag.
- + Spacers
- Size: 1/8" spacers
- Bags: 81-P18B
- Quantity: 200
-
Sale!CB SPACERS 3/16" + Spacer/Bag ProBiltSERIES Tile Spacers - 3/16" - 150 per Bag.
- + Spacers
- Size: 3/16" spacers
- Bags: 81-P316B
- Quantity: 150
-
Sale!AMSTERDAM GREY BPT MATT;15 3/4"X 31 1/2"
-
Sale!CB SEALER & COAT REMOVER 946 ML = 1 QT.STRIPPER Call for pricing
-
Sale!GOLDEN FERN 24"X48" MAT RETT
-
Sale!BIANCA PULIDO 24"X48" POL (2CM)
-
Sale!CB HOLE SAWS Carbide Hole Saw - 1-3/8" SuperiorBilt Carbide Hole Saw provides smooth, clean, and chip-free drilling.
- Cutting Material: Carbide Grit
- Best for Cutting: Ceramic Tile and Underlayments
- Item No: 82-356
- 1-3/8" Diameter Hole Saw
-
Sale!CB CHEATER BEATER BOX MIXING PADDLE 72A-85 Four rounded mixing bars allow easy mixing for the entire bucket.
- For mixing thin-set or medium-bed mortar
- Hexagonal, non-slip shaft
- Injects little or no air on a dry or wet mix
- Use with 1/2" drill motor
-
Sale!FORMA SQUARE DROP IN SINK 16"x16" Drop-in sink With overflow Clicker sink drain with ceramic cover included (installed in the sink)
-
CB GROUT SPONGE 7-1/2X5-X2-1/2 48-2XL-D SuperiorBilt Hydrophilic Sponge. Extra large sponge picks up more residue and releases it easier. Ideal for grouting and cleaning. 7-1/2" x 5-1/4" x 2-1/2" - 250 per Bale
- For grouting and cleaning
- Features a smooth, less porous surface that will not load with sand, cement or grout
- Exceptional absorption, easy to rinse, long-lasting
- Item No: 48-2XL-D
- 7-1/2" x 5-1/4" x 2-1/2" Sponge
-
Out of stockHOTELS TOWEL BAR 18" N648000003, 100102357 45 cm towel rail
-
Out of stockCB SQ NOTCH TROWEL 1/4X3/8X1/4 PART#85-51G Platinum Knee Pads. Unlike ordinary knee pads, Platinum Knee Pads are designed for comfort, offering a custom fit with designated left and right to match your knee caps and a shin support. Extra wide straps will not bind behind your legs.
- Ultimate in comfort and durability
- No bind straps and dense foam pads
- Quick snap release
- Shin support at lower wedge, relieves pressure at knees and toes
- Designated left and right to match knee caps
- Item No: P1KP1
- Platinum Knee Pads
-
Sale!2 ways concealed diverter valve 1/2”. Manual diverter. Flow rate 29,23 l/min. at 3 bar
-
Out of stockLOUNGE WALL HANDSHOWER HOLDER CHROME N158470001 Wall bracket
-
Sale!
Mapeguard UM is a premium-performance, lightweight, waterproofing and vapor-pressure-equalizing underlayment membrane that provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center or up to 24" (61 cm) on center with double-layer plywood subfloors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds. - Prevents transmission of in-plane substrate cracks up to 1/8" (3 mm)
- Recommended for use with polymer-modified mortars
- FastTrack Ready™: Approved for use over young (green) concrete and mortar beds
- Time-saving: Embed membrane then install tile immediately
- Engineered cavity design allows easy single-pass filling of surface core with less mortar
- Uncoupling, waterproofing and water vapor membrane up to 25 lbs. (11.3 kg) MVER and 100% relative humidity (RH)
- Compression resistance to support rolling loads
- Approved for radiant-heating applications
- Light green, translucent color shows mortar coverage under membrane
- Reduced “roll memory” and unique tri-layer construction keep membrane flat
-
Sale!
Mapeguard UM is a premium-performance, lightweight, waterproofing and vapor-pressure-equalizing underlayment membrane that provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center or up to 24" (61 cm) on center with double-layer plywood subfloors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds. - Prevents transmission of in-plane substrate cracks up to 1/8" (3 mm)
- Recommended for use with polymer-modified mortars
- FastTrack Ready™: Approved for use over young (green) concrete and mortar beds
- Time-saving: Embed membrane then install tile immediately
- Engineered cavity design allows easy single-pass filling of surface core with less mortar
- Uncoupling, waterproofing and water vapor membrane up to 25 lbs. (11.3 kg) MVER and 100% relative humidity (RH)
- Compression resistance to support rolling loads
- Approved for radiant-heating applications
- Light green, translucent color shows mortar coverage under membrane
- Reduced “roll memory” and unique tri-layer construction keep membrane flat
-
Out of stockWaterproofing Sheet Membrane for Ceramic Tile and Stone Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms.
-
Sale!Waterproofing Sheet Membrane for Ceramic Tile and Stone Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms.
-
Sale!
Radiant-Heating Cable for Use with Mapeheat Membrane Mapeheat Cable is a free-form, twisted-pair, floor-heating cable for use in any residential interior room where the comfort of radiant floor heating is desired. The cable can be spaced on site to provide 10, 12 or 15 W per sq. ft. based on the desired wattage output requirements of the installation. Mapeheat Cable is available in 33 lengths to accommodate areas as small as 6 sq. ft. (0.56 m²) and up to 293 sq. ft. (27.2 m²). - Heats many types of flooring, such as tile, stone, luxury vinyl tile (LVT) and engineered wood
- Available in 120 V and 240 V
- Zero EMF (electromagnetic field) cable design
- Visible mid-point marker on heating cable
- Ultra-thin cold-lead splice fits easily into Mapeheat Membrane
- Suitable for use in wet environments, such as showers and steam rooms
-
Sale!
Lightweight Uncoupling, Crack-Isolation and Waterproofing Membrane for Electrical Floor Heating Mapeheat Membrane is a lightweight uncoupling, crack-isolation and waterproofing membrane that also provides vapor management and load support. This patented membrane is designed to speed the installation of tile and stone in interior rooms such as bathrooms, kitchens and three-season rooms where the luxury of radiant floor heating is desired. Mapeheat Membrane’s thin profile works well with remodeling projects where the new floor will be installed directly over a preexisting one. Once the heating cable is set within Mapeheat Membrane’s rounded square reliefs, a tile mortar can be applied immediately. - Recommended for use with polymer-modified mortars
- Membrane thickness is less than 1/4" (6 mm)
- Replaces plywood or cement board as tile underlayment
- Works with all these floor types: ceramic tile, porcelain tile, granite, marble, natural stone, laminate/engineered wood floors, luxury vinyl tile (LVT) and luxury vinyl plank (LVP)
- Heating cable lays flat and secure
- UL-certified for wet environments, such as shower floors
- Suitable for areas with up to 25 lbs. (11.3 kg) MVER and 100% relative humidity
- Does not support mold growth
-
Sale!
Programmable Floor-Heating Thermostat Mapeheat Thermo Touch thermostat is a 7-day programmable, electric floor-heating thermostat that features a 3.5" (9 cm) color touchscreen display for accessing the super-intuitive user interface and energy use monitor. The thermostat features dual-voltage compatibility (120 V and 240 V), a physical on/ off switch and built-in GFCI protection (Class A). - 3.5" (9 cm) color touchscreen
- Floor-sensing and ambient-air-sensing
- 7-day programmability
- Suitable for tile, stone, laminate, engineered wood and luxury vinyl tile/ plank floors
- Built-in GFCI (Class A)
-
Out of stockCB MARGIN TROWEL 6"X2" 35-562G CUSTOM SOFTGRIP ProBiltSERIES Margin Trowel. Heavy-duty forged, high carbon spring steel balanced for ease of use. 6" x 2" Blade
- Forged - High Carbon Spring Steel
- Softgrip™ Handle
- Item No: 35-562G
- 6" x 2" Margin Trowel
-
Out of stockNANTES ROLL HOLDER (NO COVER) N640111501
-
Out of stockNANTES TOWEL RAIL 24" N640057001 60 cm towel rail
-
Sale!NEGRO MARQUINA CLASSICO 16"X32" BPT MATT